BHFLT - ENAMELS, GRAY 16099
- MSDS: BHFLT
- Manufacturer: PLASTI KOTE COMPANY INC
- Product Name: ENAMELS, GRAY 16099
- National Stock Number: 8010-00-079-3754
Product Identification
Product ID:ENAMELS, GRAY 16099
MSDS Date:12/30/1986
FSC:8010
NIIN:00-079-3754
MSDS Number: BHFLT
Responsible Party
MEDINA, OH 44256
US
Emergency Phone: (216) 725-4511
Info Phone: (216)725-4511
Cage: DO534
Contractor
Telephone: 330-725-4511
Cage: 07708
Ingredients
ACETONE (SARA III)
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 30-40%
OSHA PEL 1000PPM
ACGIH TLV: 750PPM/1000STEL;9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 5-10%
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ETHYL ALCOHOL (ETHANOL)
CAS: 64-17-5
RTECS: KQ6300000
Fraction By Weight: 5-10%
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM; 9192
DIACETONE ALCOHOL (4-HYDROXY-4-METHYL-2-PENTANONE)
CAS: 123-42-2
RTECS: SA9100000
Fraction By Weight: 5-6%
OSHA PEL 50 PPM
ACGIH TLV: 50 PPM; 9192
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 5 - 10%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Health Hazards Acute and Chronic:SEE BELOW
Effects of Overexposure:INHL:EXCESSIVE INHALATION OF VAPORS CAN CAUSE
NASAL/RESPIRATORY IRRITATION,DIZZ
INESS,WEAKNESS,FATIGUE,NAUSEA,HDACHE,POSSIBLE UNCONSCIOUSNESS/EVEN
ASPHYXIATION.EYE:SEVERE IRRITATION,REDNESS,TEARING,BL URRED
VISION.SKIN:IRRITATION FOR SOMEPEOPLE.INGST:GASTROINTESTINAL
IRRITATION,NAUSEA,VOMITTING,DIARRHEA
Medical Cond Aggravated by Exposure:CAN CAUSE ALLERGIC RESPIRATORY
AND/OR SKIN REACTN
First Aid
First Aid:INHL:REMOVE INDIVIDUAL TO FRESH AIR IF BREATHING IS DIFFICULT
ADMINISTER OXYGEN.BREATHING IS STOPPED GIVE ARTIFICAL
RESPIRATION/SEEK MEDICAL ATTN. EYE: FLUSH W/WTR 15MINS.
OCCASIONALLY HOLDING EYELI DS OPEN. INGST:DONOT INDUCE
VOMITTINGKEEP PERSON WARM,QUIET AND GET MEDICAL ATTN. SKIN:WASH
W/SOAP AND WTR OR VARIOUSHAND CLEANERS, WASH CLOTHING BEFORE REUSE.
Fire Fighting
Flash Point:OF/-18C
Lower Limits:1.0
Extinguishing Media:ALCOHOL FOAM, DRY CHEMICAL, CO2
Fire Fighting Procedures:WTR MAY BE USED TO COOL CLSD CONTNRS TO
PREVENT PRESSRE.IF WTR IS USED, FOG NOZ ZLES ARE PREFERED.BREATHING
APPARATUS W/FULL FACEPIECE.WTR SPRAY MAYBE INEFFCTVE
Unusual Fire/Explosion Hazard:CLSD CONTAINERS MAY EXPLOSE/AUTOIGNITE
WHEN EXPOSED TO EXTRM HEAT. VAPORS >AIR &MAY TRVL GROUND/MAYBE
MOVED BY VENTILATION & IGNITED BY FLAMES OR IGN. SOURCES
Accidental Release
Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES.VENTILATE
AREA.ABSORB LIQ. ON PAPER,VERMICULITE, FLR ABSORB, OR
OTHERABSORBENT MATERIAL TRANSFER TO CLSD CONTAINERS.
Handling
Handling and Storage Precautions:DONOT STORE IN AREAS ABOVE 120F, OR IN
DIRECT SUN LIGHT, OR NEAR HEAT, OR OPEN FLAMES. DONOT PUNCTREOR
INCINERATE.
Other Precautions:NONE
Exposure Controls
Respiratory Protection:TO AVOID BREATHING VAPORS/SPRAY MIST, OPEN
WINDOWS/DOORS. FRESH AIR ENTRY DURINGAPPLICATION AND DRYING. IF YOU
EXPERIENCE EYE WATERING,HDACHES,DIZZINESS INCRESEFRESH AIR. WEAR
RESPIRATORY PROTECTION O R LEAVE AREA.
Ventilation:PROVIDE SUFFICIENT MECHANICAL/LOCAL EXHAUST VENTILATION TO
MAINTAIN EXPOSURE BELW TLV IN SECTION II.
Protective Gloves:CHEMICAL RESISTANT GLOVES, NEOPRENE
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:WHERE SPECIAL/UNUSUAL CONDITIONS EXIST, THE
EXPERT ASSISTANCOF AN INDUSTRIAL HYGIENIEST SHOULD BE SOUGHT
Work Hygienic Practices:WASH HANDS BEFORE EATING/USING WASHROOM.
MINIMIZE PERSONAL CONTACT AND BREATHING OF VAPORS
Supplemental Safety and Health
NK
Chemical Properties
HCC:V3
Boiling Pt:B.P. Text:133-331F
Melt/Freeze Pt:M.P/F.P Text:1500F
Vapor Density:> AIR
Spec Gravity:<1
Evaporation Rate & Reference:SECT.I=>1 PROPELLANTS<1
Solubility in Water:SLIGHT TO MODERATE
Appearance and Odor:TYPICAL SOLVENT PAINT
Percent Volatiles by Volume:85-90
Stability
Stability Indicator/Materials to Avoid:YES
CONTACT WITH STRONG OXIDIZING AGENTS AND HEAT
Stability Condition to Avoid:HEAT, SPARKS, AND OPEN FLAMES
Hazardous Decomposition Products:MAY FORM TOXIC MATL, CARBON
DIOXIDE/MONOXIDE,VARIOUS HYDROCARBON, NITROGEN COMP.,ETC. WHEN
BURNED.
Disposal
Waste Disposal Methods:MATERIAL COLLECTED ON ABSORBENT MATERIAL MAY BE
DEPOSITED IN A POSTED TOXIC SUBSTANCE LANDFILL IN ACCORDANCE
W/LOCAL,STATE,& FEDERAL REGULATION.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.